All You Need To Learn About Electrical Home Inspections

When it comes to your home electrical system, you must know that there are multiple components to be wary of. It’s not about just the wiring, sockets and switches. Every year, there are reports of thousands of deaths, injuries, electrocutions and so on – and all due to lack of safety knowledge for electrical components. Moreover, electricity is also responsible for gruesome house fires, destroying the lives & investments of many people around the world. 

So, when you undertake a home inspection process, the home inspector will always undergo a check on the home’s electrical system including its working condition and whether there are any defects in the system that should be taken care of. But, what components do the home inspector check in the electrical system? Let’s find out. 

Electrical Components Inspected During The Home Inspection Process

The Electrical Load Centre

According to professional services for a home inspection in Palm Springs, the load centre or the service panel is considered the heart of the electricity source inside a house. The panel will either be placed inside the home or outside – depending on the circumstances. It will contain all the fuses, breakers and wires that are responsible for creating the electrical circuit inside the home.

During the inspection process, the home inspectors look for the following set of elements inside the load centre:

  • Any visible damage
  • Any loose breakers
  • Any burn or charring marks
  • Any instances of overheating

The Wiring

Older houses that were built before the 1980s will generally have aluminium wiring while newly made ones will always have copper wiring. The home inspector ensures that the wiring is safe and there are no chances for any fire hazard to occur. In case the house uses aluminium wiring for the electrical system, then the home inspector will mostly suggest the same be changed to copper wiring for additional safety because aluminium doesn’t conduct electricity that well and can catch fire quickly.

The Lighting Fixtures

Most of the time homeowners use a higher wattage lamp on a lighting fixture that’s not destined to power it precisely. For example, a fixture may be rated for a maximum of 100 watts but the homeowner places a 200 watts bulb on that same fixture. The light fixture will simply not be able to cope with the power requirements and will either destroy the bulb, create a fire hazard or short the power circuit.

Therefore, a home inspector will always look for such signs of electrical hazard and thereby mention the same in his or her home inspection report. However, homeowners should not be much worried because this issue can easily be solved by swapping the lamps. 

And with that concludes our comprehensive blog post. We sincerely hope you enjoyed reading our brilliant write-up. 

0 comments
0 likes
Prev post: Common Defects That Home Inspectors Find With Air-Conditioning UnitsNext post: The Absolute Advantages Of Home Electrical Inspection

Related posts

Leave a Reply

Your email address will not be published. Required fields are marked *