Home Inspection 101: How To Inspect An Air Conditioning System?

Depending upon where you live, air conditioning units can either be a standard appliance in every household or a very uncommon one. However, when you’re planning to buy a new home inside an area that does need an air-conditioning unit, then it’s your responsibility to get the same inspected by a competent home inspector. 

Therefore, to help you stay updated with the same, we are sharing some of the best recommendations on how you should be inspecting your new home’s air-conditioning system – with the help of home inspection in Gadsden services. 

Methods To Get Your Home’s Air Conditioning System Checked

  • Always Begin With The Basics

Before you proceed to check the system in-depth, it’s suggested that you take a look at your AC unit from the outside. There can be chances that the unit can be covered in bushes or overgrown weeds – especially when the system has been installed in the ground unit. Such a condition is not suitable for the system because it blocks potential airflow. After all, the space that is surrounding system should be clear. 

Moreover, the AC unit fan installed on the top side of the system should also be able to spin without any problems. Before you plan to turn ON the unit, be sure to learn that there’s no debris blocking its operation (be it split or window AC). 

Once you’ve turned ON the system, try to observe it while it operates. Ensure that the unit fan rotates without any problems and listen for any unusual noises (such as clinking, loud humming, clacking, etc.). Let the unit run for at least fifteen minutes before you can judge its current condition.

  • Always Look Out For Vibrations

When you test-run the system, if the AC unit operates very loudly or put out extra vibrations, then you should be taking a note of the same. Such an issue can lead to refrigerant leaks. Any leaking refrigerant – be it clogged or cracked – can make the unit freeze up. Furthermore, if the coils are dirty, then the problem could be much worse. 

After you’ve turned OFF the system, you should take a look at the condensation tray and whether it is functioning correctly. In case the system’s drain line is clogged, then the tray could overflow. Such a problem can be dangerous if you avoid fixing it because it causes the AC unit’s components to create an electrical shortage or form rust. 

Apart from that, you should also be checking the air filter for the system. It should be realised that air filters should be changed every 90 days; otherwise, the same would affect the unit’s overall functionality in the long-run.

0 comments
2 likes
Prev post: How To Ideally Inspect A Home Heating System?Next post: How To Find Duct Leaks In A HVAC System?

Related posts

Leave a Reply

Your email address will not be published. Required fields are marked *