8 Ways to Clean Stained Grout

It is durable and beautiful. But grout cleaning can be difficult. This is a whole different story. Grout is susceptible to staining because it’s usually light-colored and porous. Grout is susceptible to staining in a tiled entranceway or mudroom. However, spills and dirt are more common in the kitchen. Homeowners must deal with grout that has been contaminated by mold or mildew in the bathroom.

Good news: Grout cleaning doesn’t have to cost a lot. You can clean and restore grout with common household products, and a little elbow grease.

It is important to start with the mildest and least harmful option in your grout-cleaning efforts. If this fails, you can move on to more difficult, time-consuming, and odiferous options. You can test a grout cleaner in a hidden area to determine if it is suitable for your particular surface.

You must understand the differences between different types of grout before you start cleaning.

There are many types of grout available, with most varieties available in multiple colors. Before you begin to gather cleaning supplies or make a cleaning plan, it is important to consider your grout’s type and hue. These days, the two most popular types of grout are epoxy grout and traditional cement grout. These grout types can also be broken down in the following:

  • Sanded grout. Sanded grout is made with cement. It has grit you can feel and see when it’s being used. Tilers use sanded grout in larger joints (greater than 1/8 inches wide, up to 5/8 inches or 1 inch depending on the product). This grout is great for floors with heavy traffic but not for polished, smooth stone. Why? The grit might scratch these surfaces during grout application.
  • Unsanded grout. Unsanded grout can also be made with cement but doesn’t contain any grit. Tilers use unsanded grout for smaller joints. It can be as narrow as 1/16 inches wide. This grout is more durable and easier to clean than sanded grout. It can be used for polished stones as well as vertical surfaces such as shower walls. Unsanded grout is more durable and appears a little smoother that sanded grout.
  • Epoxy grout. This grout is more resistant to water stains than cement grouts and has a lower rate of shrinkage or sagging. Epoxy grout can absorb 50 times more water than cement grout and is stronger. It is suitable for harsh environments such as kitchen backsplashes or shower surrounds. It’s also easier to clean than cement grouts and is more likely to return its original color. This is especially important if you are tiling with white grout or another light color grout. Epoxy grout is less susceptible to cracking. It is more expensive than cement grout, and it takes longer to apply.

Precolored grouts are better at resisting stains and fading than others. You can also find grout formulations with polymers that provide moisture and mildew resistance. As you are trying to figure out how to clean grout, be sure to check if the grout has been sealed or needs to be resealed. This could affect how durable the grout is and what cleaning solutions are available.

Use warm water and a medium-bristle toothbrush to clean the grout.

A grout scrubber is a tool that can be used to clean grout. Most hardware stores and home centers carry several products specifically made for tile grout cleaning. A medium-bristle nylon brush is better than a hard steel brush to avoid damage to grout. Spray warm water on grout lines, and then scrub in a circular motion. Dry it off. Do not use too much water, or allow the grout to sit for too long. Keep in mind that porous cement grouts can absorb water, leading to mildew.

Use equal amounts of vinegar and warm water to spray grout.

You can use vinegar to clean grout that has not been sealed properly. Use a mixture of vinegar and warm water to fill a spray bottle. The mixture should be sprayed on grout. After it has cooled, scrub the grout with a stiff brush. Use vinegar only on grout that is not sealed.

Spray vinegar with a baking soda paste.

Baking soda can be used to clean grout. This is how to clean grout with baking soda. After the mixture has stopped foaming, scrub the grout with a brush and rinse with plain water. Finally, dry with a towel. Apply the baking soda solution to grout that is not sealed or requires resealing.

Add some hydrogen peroxide.

Hydrogen peroxide is recommended for moderate stains. It can be purchased in most pharmacies. The product can be used straight or in a grout-cleaning mixture of hydrogen peroxide and baking soda. This mixture is safe for both sealed grout and unsealed grout.

Let it sit for at least 15 minutes before applying oxygen bleach.

You can use oxygen bleach to remove stains from very dirty grout. This cleanser is usually sold in powdered form. The most popular brands are OxiClean Oxygen Bleach Plus and Biokleen Oxygen Bleach Plus.

Make sure that the grout is properly ventilated before using oxygen bleach. Next, carefully read the instructions and follow them. Allow the oxygen bleach solution to soak for about 10 to 15 minutes before you rinse. Rinse with clean water, then dry the area. This will prevent dirt from settling into grout lines.

Use a commercial grout stain removal product.

One of the most effective grout cleaners available could quickly remove mold and mildew, and restore bright white grout lines. You can either spray and wipe or use a brush to scour the grout. Spray-on products claim they don’t require scrubbing. Spray-on products can save you time and energy but may contain harsher chemicals, solvents or chlorine bleach.

While using a soft brush and cleaner is not difficult, this technique can be particularly effective for floors with heavily stained grout. Before using one of these products, read the active ingredients carefully, and heed the instructions–particularly the safety precautions.

You can steam-clean stubborn grout stains.

The best steam mop is an effective tool for cleaning grout and other hard surfaces in your home. All steam cleaners are available for residential use from Bissell, Oreck and Hoover.

Grout should not be treated with chlorine bleach.

In extreme cases, you can use commercial cleaners containing chlorine bleach or chlorine bleach sparingly to clean grout. They should not be your first choice for grout cleaning. Long-term caustic cleaners can cause grout erosion. Clorox Clean-Up might be able to help if all else fails.

Before applying chlorine bleach to any surface, rinse it thoroughly with the above-mentioned methods. Vinegar mixed with bleach can release a toxic chemical gas into the atmosphere. This is especially true for vinegar.

Grout Maintenance

After you have finished grout cleaning, spray it with household vinegar. You can also clean grout with rubbing alcohol to prevent mold and mildew. You can save time cleaning grout with rubbing alcohol by using a few wipes once a week. This will help to preserve the beauty of your tiled surfaces.

Final Thoughts

Good prevention is key to cleaning grout. This includes resealing grout as necessary, cleaning up any spillages immediately, and using mild, homemade, or commercial grout cleaners. Refer to the above steps if grout starts to look stained or discolored. It is important to remember that the easiest way to clean grout grout is the most gentle. This will ensure that grout does not get stained or discolored. If the grout stain continues to persist, you can move on to more intensive methods. When cleaning grout, ensure that you have adequate ventilation.

Keep grout clean and sealed according to the manufacturer’s recommendations. Avoid harsh cleaners and scrubbers if grout and tile are susceptible to damage. It is better to keep grout clean than having it repaired, painted, or regrout.

0 comments
0 likes
Prev post: 8 Things Wind Mitigation Inspectors Consider in InsuranceNext post: Top 3 Tips for Selling Your Van

Related posts

Leave a Reply

Your email address will not be published. Required fields are marked *